3M™ 3381 Foil Tape

$34.50

3M™ 3381 Professional Foil Tape (2″ x 50yd)

Maximize Heat Transfer. Secure Your System.

When it comes to pipe tracing, your heat cable is only as effective as its contact with the pipe. 3M™ 3381 Silver Foil Tape is the industry-standard solution for securing self-regulating heat cable to metal or plastic piping.

Unlike standard plastic zip ties or electrical tape—which can create “hot spots” or fail over time—this aluminum foil tape is engineered to spread the heat and protect your plumbing by acting as a high-efficiency thermal bridge.

What’s Included:

1 Roll of 3M™ 3381 Silver Foil Tape
- Width: 2 inches
- Length: 50 yards (150 feet)
- Construction: 2.7-mil Aluminum Foil with high-performance acrylic adhesive.

Why Professionals Use 3M™ 3381 Foil Tape:

Enhanced Heat Distribution: The aluminum backing acts as a heat sink. It draws thermal energy from the cable and transfers it around the pipe, ensuring uniform protection and preventing “cold spots.”
Superior Cold-Weather Bond: Features an aggressive acrylic adhesive specifically designed to stick to cold surfaces and remain bonded through extreme temperature fluctuations.
Mandatory for Plastic Pipes: Because PEX and PVC are poor conductors, this tape is required to spread the heat across the pipe surface so the thermal energy actually reaches the water inside.
UL Listed & Flame Retardant: Meets strict safety requirements for residential and commercial pipe trace applications.

How much 3M™ 3381 Foil Tape do I need?

This table is based on a single run of heat cable secured lengthwise along the pipe. For pipe diameters larger than 4″, we recommend a “double-wrap” or spiral method, which may require additional rolls.

Pipe Length (ft)	Standard Pipe (1″ – 4″ Diameter)	Order Quantity
0 – 150 ft	1 Roll (50 yards / 150 ft)	1 Roll
150 – 300 ft	2 Rolls (100 yards / 300 ft)	2 Rolls
300 – 450 ft	3 Rolls (150 yards / 450 ft)	3 Rolls
450 – 600 ft	4 Rolls (200 yards / 600 ft)	4 Rolls

The “Pro-Grade” Installation Method:

For maximum efficiency, apply the tape longitudinally (lengthwise) over the entire run of the cable. This fully “sandwiches” the cable against the pipe, drastically increasing the heat transfer surface area compared to simple “spiral” wrapping.

Pro-Tip from the Field:

“One roll gives you 150 feet of coverage. If you’re doing a standard 100-foot pipe run, one roll is plenty to cover the cable and wrap your valves and elbows. If you have multiple lines or larger diameter pipes, grab two to ensure you have that critical 10% overlap.”

Recommended Hardware:

[Drexan MultiTrace® Cable]: Pair this tape with our custom-cut heat cable for the ultimate pipe-freeze protection.
[Fiberglass Pipe Insulation]: Once your cable is taped down, always wrap the pipe in insulation to trap the heat.