Drexan MultiTrace® 120V Self Regulating Heat Cable | 500ft Bulk

DREXAN MULTITRACE® 240V HEAT CABLE

BACKORDER NOTICE: Orders including 5 watt 120V rated cable may be delayed until after Nov 9, 2026. All other orders (including 120V cable in other wattage ratings) will not be affected by this delay.

PRODUCT OVERVIEW

Stop guessing and start protecting. Our custom-assembled Drexan MultiTrace® Trace kits offer the industry’s most reliable ice dam prevention in a format designed for easy DIY installation. This isn’t a “big box store” retail cable—this is the exact same industrial-grade system used by professional roofing contractors across North America.

WHICH HEAT CABLE WATTAGE DO YOU NEED?

The DIY Golden Rule: Over 90% of residential installations only need 5-watt cable. Unless your area regularly experiences single-day storms dumping more than 2 feet of snow, 5-watt delivers full freeze protection with optimal energy savings.

T1- OTHER MATERIALS YOU MAY NEED:

• Aluminum Roof Clips: These corrosion-resistant clips are designed to hold the cable firmly in the “zig-zag” pattern on both asphalt shingles and metal roofs. Click Here

• M-1 Structural Adhesive: This is the only glue we trust. Unlike silicone that peels off in a year, M-1 creates a permanent chemical bond (up to 400 PSI) that cures even in damp or cold conditions. Requires a caulk gun. Click Here

HOW MANY CLIPS & GLUE DO I NEED? FOR A STANDARD ZIG-ZAG OR VALLEY INSTALLATION, A GOOD STARTING POINT IS TO ESTIMATE 1 CLIP FOR EVERY 24 INCHES (2 FEET) OF RUN.

• Note: This is an approximation based on typical roof layouts. Every project is unique, so don’t stress about getting the number perfect—you can always purchase extra clips or tubes of M-1 adhesive later if you find you need tighter spacing.

WHAT MAKES DREXAN MULTITRACE® SUPERIOR?

• Intelligent Self-Regulation: Advanced conductive core technology automatically adjusts heat output based on the outside temperature. It delivers maximum melting power when it’s freezing and throttles back as things warm up to save you money on your electric bill.

• Heavy-Duty 16 AWG Construction: Built with thicker 16 AWG nickel-plated copper bus wires. This allows for longer circuit runs and superior power distribution compared to thinner, cheaper alternatives.

• Maximum Safety & Grounding: Features a tinned copper grounding braid for superior electrical protection and a rugged, UV-resistant polyolefin outer jacket designed to survive decades of harsh solar exposure.

• Ready for Action: Each kit arrives pre-spliced to your specifications. Whether you’re protecting a residential roof, commercial gutters, or managing pipe-trace projects, this system arrives ready for installation.

T2-⚠️ VOLTAGE MISMATCH

WHY 120V MATTERS.  DO NOT PLUG THIS 120V KIT INTO A 240V POWER SOURCE. HERE IS WHAT HAPPENS IF YOU DO:

• The “Fixed Resistance” Danger: Old-school cables have a fixed resistance. If you double the voltage (by plugging into 240V), they get hotter and hotter until they burn themselves out or start a fire.

• The Steadi-On Difference (Fail-Safe): Our self-regulating cable is smarter. If you hit it with 240V, it tries to generate 4x the power. However, because it is self-regulating, it senses that massive heat spike and fights to regulate it downward.

• The Result: The cable wins the safety battle, but loses the war. The internal core is pushed beyond its limit trying to keep you safe. Instead of catching fire, it will simply “fail cold”—meaning the core degrades and will permanently stop producing heat.

• Bottom Line: Plugging this kit into 240V won’t burn down your house, but it will ruin your cable and void the manufacturer warranty.

⚠️ CRITICAL WARNING

• It is recommended not to cut this cable. If a qualified technician cuts or modifies the cable for any reason, the warranty from Heatcable.com is immediately void. In this instance, the responsibility of the warranty falls entirely on the qualified technician performing the work. If you have excess cable, instead of cutting it, we recommend doubling it back into the gutter or downspout to increase melting power in that area.

• Code Compliance: Installation must strictly adhere to all applicable state and local electrical codes. We recommend consulting with a licensed electrician or your local building authority to ensure full compliance.

⚠️ INSTALLATION WARNING

Must be installed by a Qualified Electrician. To maintain the UL 508A Certification and ensuring the GFEP functions correctly, all input and output wiring must adhere to local, state, and national electrical codes.

✅ COMPATIBILITY CHECKLIST

Before you buy, confirm this kit fits your home:

• Voltage: 120V standard outlet (Verify your power outlet is 120V, not 240V).

• Gutter Type: Safe for Aluminum, Steel, and Copper gutters/downspouts.

• Outlet Proximity: Measure the distance from your roof edge to the outlet. You cannot use an extension cord. Ensure the kit length + lead is sufficient to reach the power source directly.

❌ INCOMPATIBLE / DANGER

To prevent fire, shock, or system failure, AVOID the following:

• NO EXTENSION CORDS: Never plug this kit into an extension cord. The resistance can cause overheating and fire. It must be plugged directly into a wall receptacle or controller.

• NO BURIED CABLE: Do not install this cable inside walls, under shingles, or buried in building insulation. The cable can be installed under our Patented Thermal Cartridge System.

• NO COILING: While Steadi-On cable is self-regulating, do not leave the cable coiled up in a tight spool while powered on. Unspool the cable completely before plugging it in to test.

⛑️ IMPORTANT SAFETY & SPECS:

• GFEP Protection: Safety is non-negotiable. If you do not select a kit with a built-in GFEP plug, the device must be used with a Ground-Fault Equipment Protected (GFEP) circuit.

• System Compatibility: The GFEP can also be applied in a custom or standard controller box, provided the controller already includes a GFEP component.

• Factory-Built Confidence: We don’t outsource our quality. These are assembled right here in Utah by pros who know winter.

🔥 PRO-TIPS FROM THE FIELD: DON’T COMPROMISE YOUR ROOF’S INTEGRITY

To ensure a truly “leak-free” installation, we strongly recommend using Patented Roof Clips and M1 Structural Adhesive.

For over 20 years, these clips have been the industry standard for securing heat cable without puncturing shingles or metal roofing. Using M1 Adhesive ensures a permanent, waterproof bond that maintains your roof’s integrity while providing a professional, low-profile finish.

T-3 🛠 TOOLS & TIPS

• Caulk Gun: Required for applying the M-1 Structural Adhesive. (We recommend a high-ratio “dripless” gun for easier application in cold weather).

• Extension Ladder: To safely access your roofline.

• Clean Rags & Isopropyl Alcohol: Essential for cleaning smooth surface areas—such as membrane and metal roofs—where clips will be glued. Any dust or grime left on the surface will cause the adhesive to fail.

• Light Duty Brush: Essential for brushing away loose granules and debris on asphalt shingle roofs before installing clips.

• Measuring Tape: To ensure consistent spacing for your “zig-zag” pattern.

• Pliers: Helpful for crimping the roof clips slightly if needed for a tighter hold on the cable.

T4- OUR  GUARANTEE:

We stand behind our craftsmanship. Every Steadi-On Multitrack 240V Heat Cable is backed by an unbeatable 10-Year Limited Warranty. We build them to last, so you can sleep soundly while the snow melts.

NEED HELP WITH LAYOUT?

Check out our “Diagrams & Layouts” page or watch Eric’s latest tutorial to see exactly how to space your clips and apply M-1 glue for a leak-free install.  – Coming Soon!

Please consult the Steadi-On MultiTrace spec sheet for circuit capacities. Because this item is built to your unique specifications, returns are subject to a 25% restocking fee plus return shipping costs.