Single Circuit GFEP TStat Controller

SINGLE CIRCUIT GFEP THERMOSTAT CONTROLLER

(With Integrated Nader GFEP Breaker & LED Indicator)

Industrial Precision. Residential Safety.

Stop burning money on 24/7 heating. You wouldn’t run your air conditioning with the windows open, so why run your heat cable when it’s 50°F outside? Our Single Circuit GFEP Controller is the “brain” your system needs. It combines industrial-grade switching, precise temperature control, and critical safety protection into one pre-assembled, UL-certified box.

🏭 CERTIFIED UL 508A PANEL SHOP

We don’t just “build boxes”—we engineer solutions. Wasatch Heat Cable is a Certified UL 508A Panel Shop. This distinction matters. It means this isn’t a garage DIY project; it is a professionally engineered control panel built to rigorous national safety standards. Every unit is assembled, wired, and tested in-house by certified technicians to ensure it meets the same quality benchmarks as industrial factory controls.

WHAT’S UNDER THE HOOD?

This isn’t a cheap plastic timer. We use components that professional electricians trust.

• 1x Nader GFEP Circuit Breaker: We don’t rely on standard breakers. We utilize Nader industrial-grade Ground-Fault Equipment Protectors. This critical component constantly monitors your cable for current leakage (shorts), instantly cutting power if a fault is detected to prevent fire or shock. Note: This built-in protection saves you from buying an expensive GFEP breaker for your main panel.

• Precision Thermostat (T-Stat): The integrated thermostat ensures your system only runs when it needs to. Set your activation temperature (typically 38°F), and the system handles the rest—turning on when the freeze sets in and shutting off when the sun comes out.

• External LED Indicator: No more guessing. The high-visibility LED light on the door gives you an instant visual status check. If the light is on, your system is fighting the ice.

WHY YOU NEED THIS CONTROLLER

• Set It & Forget It: Stop stressing about plugging and unplugging your cable manually. This controller automates the entire process.

• Massive Energy Savings: By running only when temperatures drop below freezing, you eliminate hundreds of hours of wasted electricity usage per season.

• Code Compliant Safety: Electrical code requires GFEP protection for all heat trace systems. This panel has it built-in, making your installation compliant and safe immediately.

SPECIFICATIONS

• Voltage: 120V / 240V (Select Voltage at Checkout)

• Amperage: Rated for up to 30 Amps (Check specific model)

• Enclosure: NEMA 4X (Weatherproof & UV Resistant)

• Certification: UL 508A Listed

🔥 PRO-TIPS FROM ERIC WIMMER

“The light is your best friend.” “I tell people all the time: the biggest failure point in a heat cable system isn’t the cable—it’s the homeowner forgetting to turn it on. With this panel, you don’t have to remember. But that LED? That’s your peace of mind. When you look out the window in a blizzard, seeing that little light glowing tells you your roof is protected without you ever stepping foot outside.”

⚠️ INSTALLATION WARNING

Must be installed by a Qualified Electrician. While this panel simplifies the control side, it involves line-voltage wiring. To maintain the UL 508A Certification and ensuring the GFEP functions correctly, all input and output wiring must adhere to local, state, and national electrical codes.